diff --git a/srcpkgs/chrony/files/chrony.conf b/srcpkgs/chrony/files/chrony.conf deleted file mode 100644 index c9b44befbac..00000000000 --- a/srcpkgs/chrony/files/chrony.conf +++ /dev/null @@ -1,317 +0,0 @@ -####################################################################### -# -# This is an example chrony configuration file. You should copy it to -# /etc/chrony.conf after uncommenting and editing the options that you -# want to enable. The more obscure options are not included. Refer -# to the documentation for these. -# -# Copyright 2002 Richard P. Curnow -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of version 2 of the GNU General Public License as -# published by the Free Software Foundation. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -# -# -####################################################################### -### COMMENTS -# Any of the following lines are comments (you have a choice of -# comment start character): -# a comment -% a comment -! a comment -; a comment -# -# Below, the '!' form is used for lines that you might want to -# uncomment and edit to make your own chrony.conf file. -# -####################################################################### -####################################################################### -### SPECIFY YOUR NTP SERVERS -# Most computers using chrony will send measurement requests to one or -# more 'NTP servers'. You will probably find that your Internet Service -# Provider or company have one or more NTP servers that you can specify. -# Failing that, there are a lot of public NTP servers. There is a list -# you can access at http://support.ntp.org/bin/view/Servers/WebHome or -# you can use servers from the pool.ntp.org project. - -! server foo.example.net iburst -! server bar.example.net iburst -! server baz.example.net iburst - -pool pool.ntp.org iburst - -# However, for dial-up use you probably want these instead. The word -# 'offline' means that the server is not visible at boot time. Use -# chronyc's 'online' command to tell chronyd that these servers have -# become visible after you go on-line. - -! server foo.example.net offline -! server bar.example.net offline -! server baz.example.net offline - -! pool pool.ntp.org offline - -# You may want to specify NTP 'peers' instead. If you run a network -# with a lot of computers and want several computers running chrony to -# have the 'front-line' interface to the public NTP servers, you can -# 'peer' these machines together to increase robustness. - -! peer foo.example.net - -# There are other options to the 'server' and 'peer' directives that you -# might want to use. For example, you can ignore measurements whose -# round-trip-time is too large (indicating that the measurement is -# probably useless, because you don't know which way the measurement -# message got held up.) Consult the full documentation for details. - -####################################################################### -### AVOIDING POTENTIALLY BOGUS CHANGES TO YOUR CLOCK -# -# To avoid changes being made to your computer's gain/loss compensation -# when the measurement history is too erratic, you might want to enable -# one of the following lines. The first seems good for dial-up (or -# other high-latency connections like slow leased lines), the second -# seems OK for a LAN environment. - -! maxupdateskew 100 -! maxupdateskew 5 - -####################################################################### -### FILENAMES ETC -# Chrony likes to keep information about your computer's clock in files. -# The 'driftfile' stores the computer's clock gain/loss rate in parts -# per million. When chronyd starts, the system clock can be tuned -# immediately so that it doesn't gain or lose any more time. You -# generally want this, so it is uncommented. - -driftfile /var/db/chrony/drift - -# If you want to use the program called chronyc to configure aspects of -# chronyd's operation once it is running (e.g. tell it the Internet link -# has gone up or down), you need a password. This is stored in the -# following keys file. (You also need keys to support authenticated NTP -# exchanges between cooperating machines.) Again, this option is -# assumed by default. - -keyfile /var/db/chrony/keys - -# Tell chronyd which numbered key in the file is used as the password -# for chronyc. (You can pick any integer up to 2**32-1. '1' is just a -# default. Using another value will _NOT_ increase security.) - -commandkey 1 - -# With this directive a random password will be generated automatically. - -generatecommandkey - -# chronyd can save the measurement history for the servers to files when -# it it exits. This is useful in 2 situations: -# -# 1. On Linux, if you stop chronyd and restart it with '-r' (e.g. after -# an upgrade), the old measurements will still be relevant when chronyd -# is restarted. This will reduce the time needed to get accurate -# gain/loss measurements, especially with a dial-up link. -# -# 2. Again on Linux, if you use the RTC support and start chronyd with -# '-r -s' on bootup, measurements from the last boot will still be -# useful (the real time clock is used to 'flywheel' chronyd between -# boots). -# -# Enable these two options to use this. - -dumponexit -dumpdir /var/db/chrony - -# chronyd writes its process ID to a file. If you try to start a second -# copy of chronyd, it will detect that the process named in the file is -# still running and bail out. If you want to change the path to the PID -# file, uncomment this line and edit it. The default path is shown. - -! pidfile /var/run/chronyd.pid - -####################################################################### -### INITIAL CLOCK CORRECTION -# This option is useful to quickly correct the clock on start if it's -# off by a large amount. The value '10' means that if the error is less -# than 10 seconds, it will be gradually removed by speeding up or -# slowing down your computer's clock until it is correct. If the error -# is above 10 seconds, an immediate time jump will be applied to correct -# it. The value '1' means the step is allowed only on the first update -# of the clock. Some software can get upset if the system clock jumps -# (especially backwards), so be careful! - -makestep 10 1 - -####################################################################### -### LOGGING -# If you want to log information about the time measurements chronyd has -# gathered, you might want to enable the following lines. You probably -# only need this if you really enjoy looking at the logs, you want to -# produce some graphs of your system's timekeeping performance, or you -# need help in debugging a problem. - -! logdir /var/log/chrony -! log measurements statistics tracking - -# If you have real time clock support enabled (see below), you might want -# this line instead: - -! log measurements statistics tracking rtc - -####################################################################### -### ACTING AS AN NTP SERVER -# You might want the computer to be an NTP server for other computers. -# e.g. you might be running chronyd on a dial-up machine that has a LAN -# sitting behind it with several 'satellite' computers on it. -# -# By default, chronyd does not allow any clients to access it. You need -# to explicitly enable access using 'allow' and 'deny' directives. -# -# e.g. to enable client access from the 192.168.*.* class B subnet, - -! allow 192.168/16 - -# .. but disallow the 192.168.100.* subnet of that, - -! deny 192.168.100/24 - -# You can have as many allow and deny directives as you need. The order -# is unimportant. - -# If you want chronyd to act as an NTP broadcast server, enable and edit -# (and maybe copy) the following line. This means that a broadcast -# packet is sent to the address 192.168.1.255 every 60 seconds. The -# address MUST correspond to the broadcast address of one of the network -# interfaces on your machine. If you have multiple network interfaces, -# add a broadcast line for each. - -! broadcast 60 192.168.1.255 - -# If you want to present your computer's time for others to synchronise -# with, even if you don't seem to be synchronised to any NTP servers -# yourself, enable the following line. The value 10 may be varied -# between 1 and 15. You should avoid small values because you will look -# like a real NTP server. The value 10 means that you appear to be 10 -# NTP 'hops' away from an authoritative source (atomic clock, GPS -# receiver, radio clock etc). - -! local stratum 10 - -# Normally, chronyd will keep track of how many times each client -# machine accesses it. The information can be accessed by the 'clients' -# command of chronyc. You can disable this facility by uncommenting the -# following line. This will save a bit of memory if you have many -# clients. - -! noclientlog - -# The clientlog size is limited to 512KB by default. If you have many -# clients, especially in many different subnets, you might want to -# increase the limit. - -! clientloglimit 4194304 - -####################################################################### -### REPORTING BIG CLOCK CHANGES -# Perhaps you want to know if chronyd suddenly detects any large error -# in your computer's clock. This might indicate a fault or a problem -# with the server(s) you are using, for example. -# -# The next option causes a message to be written to syslog when chronyd -# has to correct an error above 0.5 seconds (you can use any amount you -# like). - -! logchange 0.5 - -# The next option will send email to the named person when chronyd has -# to correct an error above 0.5 seconds. (If you need to send mail to -# several people, you need to set up a mailing list or sendmail alias -# for them and use the address of that.) - -! mailonchange wibble@foo.example.net 0.5 - -####################################################################### -### COMMAND ACCESS -# The program chronyc is used to show the current operation of chronyd -# and to change parts of its configuration whilst it is running. - -# By default chronyd binds to the loopback interface. Uncomment the -# following lines to allow receiving command packets from remote hosts. -! bindcmdaddress 0.0.0.0 -! bindcmdaddress :: - -# Normally, chronyd will only allow connections from chronyc on the same -# machine as itself. This is for security. If you have a subnet -# 192.168.*.* and you want to be able to use chronyc from any machine on -# it, you could uncomment the following line. (Edit this to your own -# situation.) - -! cmdallow 192.168/16 - -# You can add as many 'cmdallow' and 'cmddeny' lines as you like. The -# syntax and meaning is the same as for 'allow' and 'deny', except that -# 'cmdallow' and 'cmddeny' control access to the chronyd's command port. - -# NOTE, even if the host where you run chronyc is granted access, you -# still need a command key set up and you have to know the password to -# put into chronyc to allow you to modify chronyd's parameters. By -# default all you can do is view information about chronyd's operation. - -####################################################################### -### REAL TIME CLOCK -# chronyd can characterise the system's real-time clock. This is the -# clock that keeps running when the power is turned off, so that the -# machine knows the approximate time when it boots again. The error at -# a particular epoch and gain/loss rate can be written to a file and -# used later by chronyd when it is started with the '-s' option. -# -# You need to have 'enhanced RTC support' compiled into your Linux -# kernel. (Note, these options apply only to Linux.) - -rtcfile /var/db/chrony/rtc - -# Your RTC can be set to keep Universal Coordinated Time (UTC) or local -# time. (Local time means UTC +/- the effect of your timezone.) If you -# use UTC, chronyd will function correctly even if the computer is off -# at the epoch when you enter or leave summer time (aka daylight saving -# time). However, if you dual boot your system with Microsoft Windows, -# that will work better if your RTC maintains local time. You take your -# pick! - -! rtconutc - -# By default chronyd assumes that the enhanced RTC device is accessed as -# /dev/rtc. If it's accessed somewhere else on your system (e.g. you're -# using devfs), uncomment and edit the following line. - -! rtcdevice /dev/misc/rtc - -####################################################################### -### REAL TIME SCHEDULER -# This directive tells chronyd to use the real-time FIFO scheduler with the -# specified priority (which must be between 0 and 100). This should result -# in reduced latency. You don't need it unless you really have a requirement -# for extreme clock stability. Works only on Linux. Note that the "-P" -# command-line switch will override this. - -! sched_priority 1 - -####################################################################### -### LOCKING CHRONYD INTO RAM -# This directive tells chronyd to use the mlockall() syscall to lock itself -# into RAM so that it will never be paged out. This should result in reduced -# latency. You don't need it unless you really have a requirement -# for extreme clock stability. Works only on Linux. Note that the "-m" -# command-line switch will also enable this feature. - -! lock_all diff --git a/srcpkgs/chrony/template b/srcpkgs/chrony/template index 9f5f72c1d38..428b93098af 100644 --- a/srcpkgs/chrony/template +++ b/srcpkgs/chrony/template @@ -1,7 +1,7 @@ # Template file for 'chrony' pkgname=chrony version=3.2 -revision=2 +revision=3 build_style=gnu-configure configure_args="--without-nss --enable-scfilter --with-sendmail=/usr/bin/sendmail" hostmakedepends="pkg-config" @@ -26,7 +26,8 @@ alternatives=" ntpd:ntpd:/etc/sv/chronyd" post_install() { - vconf ${FILESDIR}/chrony.conf + vconf examples/chrony.conf.example3 chrony.conf + vsconf examples/chrony.conf.example1 + vsconf examples/chrony.conf.example2 vsv chronyd - rm -rf ${DESTDIR}/usr/share/doc }